Fence and gate posts, signs, flagpoles and ground-mounted solar arrays. Ground screws are quick to line up, carry wind uplift well, and don't leave concrete in the ground when things change.
Why screw piles
- Posts go in fast and line up perfectly, with no concrete to set.
- Ground screws carry wind uplift well, which matters for signs and solar panels.
- Nothing left in the ground if the fence, sign or array moves.
- Supply only for builders and fencers, or installed by us.
Good to know
For signs and solar arrays the post size and depth depend on the wind load, so we'll ask for the supplier's or engineer's details. Let us know about underground services before we come, especially on farms and commercial sites.
How it works
From enquiry to building on it.
-
1
Tell us about it
Call, email or send your estimate. Plans help, but a sketch with dimensions is fine to start.
-
2
Site check
We look at access, ground and underground services, and confirm the right pile for the job.
-
3
Engineering
For consented work, the engineer designs the layout and target torque and issues a PS1.
-
4
Install day
Set-out, then each pile screwed to target torque and cut to level, with depth and torque logged.
-
5
Handover
The torque record and PS3 go to you and the engineer, and your builder starts straight away.
Other applications
Got a site? Let's get it piled.
Tell us what you're building and where. We'll come back with a quote, usually within a working day.